CompX Various Cam Locks | KD14A, C8060 1 3/4" | C8060KD14A

- Each lock comes with two stop washers allowing the cam to turn either 90° or 180° based on application. - For drawers and right-hand or left-hand doors. - Cams included for lipped/overlay construction (straight cam; 1-1/2" extension) or flush construction (formed cam; 1-1/8" extension, 11/32" offset). - Stop washers provided for both 90° or 180° cam turns. - For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed below. To accommodate an overlay construction using a 3/4" front and a 3/4" frame, order the NLC8073 lock and the NLC7014-2C cam. - Key removable in both locked and unlocked positions. - Supplied with two keys, trim washer, spur washer (for wood), mounting nut, two cams and two stop washers. - Unassembled REMOVACORE™ versions of this lock are available. - Stock Keying is specified on table below: KA = All (K)eyed (A)like to key number specified, master key will not work on these locks KD = All (K)eyed (D)ifferent, various lock numbers, master key will not work on these locks KDMKD = All (K)eyed (D)ifferent and (M)aster (K)eyed, master key will work on these locks - Other key changes available from National Lock via SPECIAL ORDER. - Packing: 25 each per box. Sold In: Both broken and full box quantities. Discount available for full box orders.