CompX National Disc Tumbler Cam | Lock, 2" Cylinder with 3/4" Mounting Hole, Bright Nickel C8061-C346A-14A | C8061C346A14A

- Each lock includes two stop washers that allow the cam to turn either 90° or 180° based on application. - The Cams included for lipped/overlay construction are a straight cam with a 1-1/2" extension. For flush construction, a formed cam with a 1-1/8" extension and an 11/32" offset is provided. - Supplied with two keys, trim washer, spur washer (for wood), mounting nut, two cams, and two stop washers. - Key removable in both locked and unlocked positions. - For drawers, right-hand or left-hand doors. - Stop washers are provided for both 90° or 180° cam turns. - To accommodate an overlay construction using a 3/4" front and a 3/4" frame, order the NLC8073 lock and the NLC7014-2C cam. - For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed below. - Unassembled REMOVACORE™ versions of this lock are available. - Stock Keying is specified on table below: KA = All (K)eyed (A)like to key number specified, master key will not work on these locks. KD = All (K)eyed (D)ifferent, various lock numbers, master key will not work on these locks. KDMKD = All (K)eyed (D)ifferent and (M)aster (K)eyed, master key will work on these locks. - Other key changes available from National Lock via SPECIAL ORDER - Packing: 25 each per box. Sold In: Both broken and full box quantities. Discount available for full box orders.