- Each lock comes with two stop washers allowing the cam to turn either 90° or 180° based on application.
- Cams included for lipped/overlay construction (straight cam; 1-1/2" extension) or flush construction (formed cam; 1-1/8" extension, 11/32" offset).
- For drawers and right-hand or left-hand doors.
- The combined thickness of the front and frame cannot exceed the cylinder length listed below for overlay application. To accommodate an overlay construction using a 3/4" front and a 3/4" frame, order the NLC8073 lock and the NLC7014-2C cam.
- Stop washers provided for both 90° or 180° cam turns.
- Key removable in both locked and unlocked positions.
- Supplied with two keys, trim washer, spur washer (for wood), mounting nut, two cams, and two stop washers.
- Unassembled REMOVACORE™ versions of this lock are available.
- Stock keying is specified on the table below: KA = All (K)eyed (A)like to key number specified, master key will not work on these locks. KD = All (K)eyed (D)ifferent, various lock numbers, master key will not work on these locks. KDMKD = All (K)eyed (D)ifferent and (M)aster (K)eyed, master key will work on these locks.
- Other key changes available from National Lock via SPECIAL ORDER.
- Packing: 25 each per box.
- Sold In: Both broken and full box quantities. Discount available for full box orders.
