Level Primer White is a new generation of post-catalyzed amino alkyd finishing system that offers the ultimate in durability. The Level Primer White formula was specifically designed for interior wood surfaces that are exposed to moisture, heat, and household chemicals. It was also designed so that you can build the dry mils past the normal 5 mils maximum recommendation. So, if you want to have a full fill or thick build look and you do not want to go to polyurethane, Level Primer White is for you. For a full fill look, sand back each coat more aggressively. For a thick build look, just sand with a light scuff between coats. Level Primer White gives you good sag resistance and can be sprayed from 4-10 mils wet on a vertical surface. It can also be built up to 10 mils dry be allowing each coat to dry thoroughly, lightly scuff sanding between coats. Other Products: For catalyst use C149 1 M.L. Campbell Care Catalyst. Stir Primer well before spraying. Level Primer White has a thixotropic viscosity and does not need to be reduced: viscosity will reduce with shear from spraying. If reduction is necessary, use M.L. Campbell Standard lacquer thinner C16036 or Care Reducer C162 1. Reducing the Primer will reduce the sag resistance of the product and its ability to build.
