Building Code Compliance
HB&G has updated our product testing to comply with changes to the Building Codes (IBC/IRC) and to the Acceptance Criteria for Fiberglass Columns. The 2 major changes that impacted PermaCast® and PermaLite® were:
- Eccentric Axial Loading - the new maximum allowable load values are based on eccentric (offset) axial load as opposed to concentric (centered) axial loading.
- Increased Safety Factor - the safety factor on the allowable load was increased from 2.5 times to 5 times
Eccentric loading of columns is not recommended by HB&G.
HB&G recommends following the installation instructions included with the product purchased. HB&G structural products conform to 2018
IBC/IRC.
